PFI-GYP - Fire rated insulated access door with drywall flange

Description

The PFI-GYP is specially designed to be installed on fire rated drywall covered ceilings and walls. Once a sufficient layer of drywall compound is applied to its corner bead flange, it will leave only the door panel visible for a more aesthetic look. Once the installation is complete and the provided springs are hooked to the back of the panel, this door will be self closing and self locking thus meeting fire certification standards. The largest fire rated PFI-GYP doors available for vertical and horizontal installations are respectively: (48’’ x 48’’) and (24’’ x 36’’ or 864 sq inches).

PFI-GYP fire rated access door specifications

intertek warnock hersey c us 2

 

Fire rated by Intertek - Warnock Hersey

Fire rating:

For installation in vertical wall assemblies:

Certified to standards:  UBC 7-2 (1997), UL 10B (1997), UL 10B (2009), NFPA 252 (2003), NFPA 252 (2008), NFPA 252 (2012), CAN/ULC S104 (R1985), CAN/ULC S104 (2010).

Rating achieved: 3 hours, neutral/negative pressure.

Maximum size:  48" x 48" (1219 mm x 1219 mm). MAximum area of 2304 in2. Tolerance on height and width limitations is +-3'' (76 mm) as long as the area does not exceed 2304 in2.

Temperature rise: 250°F (121°C) after 30 mins. 450°F (232°C) after 60 mins.

For installation in horizontal ceiling assemblies:

Certified to standards: ASTM E119 (2012), CAN/ULC S101 (2007).

Rating achieved: 3 hours in non-cumbustible construction. 1 hour in combustible construction.

Maximum size: 24" x 36" (hinges & latch on the 36'' sides) or 864 sq inches (620 mm x 914 mm). Tolerance on dimension limitations are +-3'' (76 mm) as long as the area does not exceed 864 in2.  

Temperature rise: Not applicable. 

Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door
Insulation: 2" Mineral wool
Hinge: Continuous piano hinge
Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included
Inside panel release: Standard on all doors over 12'' x 12''
Automatic panel closer: Standard on all doors
Finish: High quality grey powder coat primer
Packaging: Individually wrapped, 1 per box
   
 

 

Options

Material: Stainless steel #4 (brushed finish)
Lock / latch: Handle operated slam latch, hex head slam latch, mortise preperation for cylinder (cylinder optional), mortise deadbolt lock
   
 

 

locate a distributor

Documents

 

usgbc cbdca LEED

The PFI-GYP access door can contribute directly to a project's ability to achieve LEED certification.

 

Table of standard sizes (other sizes available upon request)

Door size (W x H)Rough Wall openingShipping weightNumber of locks
inchesincheslbskg
8 x 8 8¼ x 8¼ 7 3.2 1
12 x 12 12¼ x 12¼ 10 4.5 1
16 x 16 16¼ x 16¼ 14 6.4 1
18 x 18 18¼ x 18¼ 17 7.7 1
22 x 22 22¼ x 22¼ 20 9.1 1
22 x 30 22¼ x 30¼ 30 13.6 1
22 x 36 22¼ x 36¼ 34 15.5 2
24 x 24 24¼ x 24¼ 24 10.9 1
24 x 36 24¼ x 36¼ 36 16.4 2
* 24 x 48 24¼ x 48¼ 68 30.9 2
* 32 x 32 30¼ x 30¼ 43 19.6 2
* 36 x 36 36¼ x 36¼ 50 22.7 2
*48 x 48 48¼ x 48¼ 83 37.7 2

*Not rated for ceiling installation (maximum 24" x 36")

Note 1: Maximum door size 24" x 36" can also be calculated by multiplying the surface area of the door (24"x36"). The maximum surface area is 864 sq inches. The maximum height or width is 36". All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28" x 28" = 784 sq inches.